c700x420-2

A Guide On How To Replace Your Windshield

Does your windshield need to be replaced? Have you noticed any cracks that have formed on your windshield? If you do need to get a windshield replacement, you may need a guide on how to replace it yourself. This post can teach you how to easily replace your windshield. If you do not know where to start on replacing your windshield, read this guide below in order to get started.

  1. Remove the rubber grips and moulding around your old windshield. You can use a small knife or utility tool to remove these fasteners, you should be careful when you remove them so that you do not damage them.
  2. You should then try and be ready to pry out your old windshield. You should take care and be careful in this step since one wrong move could do damage to your vehicle. Take a look to see which is the best side and angle to remove the windshield from.
  3. Next, you will want to remove the urethane. The urethane is a strong adhesive that is used to stick your windshield onto your car. Using your knife or a windshield removal tool, you can cut the urethane from your old windshield.
  4. Finally, when you have removed the old windshield, with another person, you should try and lift out your old windshield. You should ideally have two people doing this job because it takes people on both sides of the car to safely lift out the old windshield.
  5. You should then prepare your car to have a new windshield installed. First, you will want to trim out any rust or dried out urethane from the car itself. Scrape off these dried out spots in order to make sure that your new windshield is installed smoothly.
  6. Next, you can apply the urethane primer onto your car. Spread out the primer evenly and make sure to coat the spot where you want the new windshield to be attached. This primer will ensure a good adhesive stick when you put on the urethane.
  7. Using a caulking gun, you can then apply the new urethane. Make sure that the spots where you apply the urethane are clean and smooth.
  8. You can then now put in your new windshield. You should do this slowly in order to make sure that the alignment is good. Do not touch the edges of the windshield, because dirt from your hands could contaminate the adhesive.
  9. Typically, you should wait at least 24 hours for the urethane to dry. After that 24 hours is over, you can then now drive your car with your new windshield.

If you follow these steps, you will be able to replace your windshield in no time. It can be a difficult task to replace your windshield, but if you do it yourself, you can save on labour costs, because you do no have to pay anyone to replace your windshield.

Replacing your windshield is pretty easy too! You can just follow these simple steps in order to install a brand new windshield on your vehicle.

5 Factors And Tips To Help You Get Your Windshield Replaced

There are so many places and people that you can hire in order to get your windshield replaced. It can be hard to find the right company to get the job done. Your windshield is a very important part of your car, so it is important that you find the right person. If you do find the right person who can sell you a windshield replacement, then you will be able to have your damaged windshield replaced without any worry. Are you looking for the right company to replace your windshield? Here are a few tips to help you choose the right one.

8a31244e-5589-4837-9039-29216356d3d9_1-7a825488d337ed2df280ba5d5f9604f4

  1. Stick with a reputable company

You will want to hire a company that has an existing history; you should not just hire any person, who is driving a tow truck to replace your windshield. Check on the history of the company by reading reviews about them. A company that has had lots of experience will be a better choice. And an even better company to hire for your windshield replacement is a company that has a lot of good reviews, that you can be assured that your car windshield replacement is in good hands.

 

  1. The brand of auto glass replacement

There are a lot of branded auto glass replacements out there, you will want to use an auto glass brand makes top quality auto glass. A reputable company can offer you choices on windshield replacement. There can be an option to choose the more expensive original equipment auto glass or go with something cheaper, such as an original equipment equivalent. If your car is more high end, you may want to pay for the most expensive option of an original equipment windshield

  1. Ask about their warranty

You will want to go with a company that offers a warranty coverage policy. After all, if anything happens to your newly replaced windshield, you will want to have any problems solved right away. A company that does not offer a good warranty policy should be avoided. This could be a sign that they are not trustworthy and that they will not honour the customers in the event of their windshield replacement failing.

 

  1. Check to see if they are following regulations

brokenglass-2-1You should hire a company that is following government regulations when it comes to the grade of the materials they use. The auto glass that they carry should be high grade and should utilise materials that are original equipment or original equipment equivalent. The type of adhesive that they use should also be high grade; their urethane brand should be certified by an agency.

 

  1. Talk with their customer service

If you are dealing with a company, then you had better make sure that they have a good customer service. A company with a bad customer service representative will mean that your dealings with their other employees will be unpleasant.

 

If you follow these tips, then you are sure to find the right kind of company to hire to get your windshield replaced. A good and reliable auto glass company should have all of the qualities that are laid out in this post.